![FASTCABLING](/img/default-banner.jpg)
- 1 123
- 3 419 461
FASTCABLING
Приєднався 13 сер 2018
Step-by-Step Guide to Installing a 5V/12V Voltage Regulator
In this video, we'll walk you through the process of installing the 5V/12V Voltage Regulator, a crucial component for maintaining steady power delivery in your electronics projects, especially in solar battery power system. Whether you're powering an LED strip or any other device, this guide will provide you with all the information you need to ensure a successful installation.
0:00 Introduction
Overview of the 5V/12V Voltage Regulator 8402-06
Preparing the Installation
Materials Needed
Step-by-Step Instructions
Testing and Troubleshooting
Additional Tips
Here is the product you can see in the video
www.fastcabling.com/product/5v-12v-voltage-regulator/
If you need any assistance with your project, please feel free to contact us here: www.fastcabling.com/free-solution-design/
Here is our solution page:
www.fastcabling.com/pages/networking-solutions/
Also, find FASTCABLING here:
------------------------------------
Facebook Page. Fastcabling
Twitter. fastcabling
LinkedIn. www.linkedin.com/company/fastcabling/
0:00 Introduction
Overview of the 5V/12V Voltage Regulator 8402-06
Preparing the Installation
Materials Needed
Step-by-Step Instructions
Testing and Troubleshooting
Additional Tips
Here is the product you can see in the video
www.fastcabling.com/product/5v-12v-voltage-regulator/
If you need any assistance with your project, please feel free to contact us here: www.fastcabling.com/free-solution-design/
Here is our solution page:
www.fastcabling.com/pages/networking-solutions/
Also, find FASTCABLING here:
------------------------------------
Facebook Page. Fastcabling
Twitter. fastcabling
LinkedIn. www.linkedin.com/company/fastcabling/
Переглядів: 87
Відео
Safely Boosting Voltage: Using a 48V Voltage Booster with Batteries
Переглядів 1902 години тому
Welcome to our comprehensive guide on safely boosting voltage using the 48V Voltage Booster with batteries! We'll demonstrate a practical example of using a 12V battery to power a standard PoE switch, ensuring stable voltage output for PoE devices such as cameras and WAPs. Follow our step-by-step installation guide to confidently set up your voltage booster, and learn tips on troubleshooting an...
Expand WiFi Up to 5 Kilometers Using Wireless Network Bridges
Переглядів 3954 години тому
In this video, we'll show you how to expand your WiFi coverage up to 5 kilometers using wireless network bridges and access points. Whether you need to provide WiFi for a large outdoor area, remote locations, or even between buildings, this comprehensive guide will help you set up a reliable, high-performance network without the hassle of running cables. 0:00 Introduction Understanding Wireless...
Enhancing WiFi Coverage in a Large Industrial Factory | Case Study
Переглядів 2859 годин тому
Welcome to our case study on enhancing WiFi coverage in a large industrial factory. In this video, we delve into the challenges faced by a factory with a new open-air work area 300 meters away from the main factory, and the solutions deployed to ensure seamless connectivity. 0:00 Introduction Challenges & Solutions Features and Benefits of Outdoor WiFi 6 Access Points Introduction to the 300-me...
Outdoor WiFi Solutions: Extending Coverage to Your Backyard | Case Study
Переглядів 39314 годин тому
Are you struggling with weak WiFi signal in your backyard, hindering your connectivity for work and leisure? Join us in this case study where we demonstrate how a homeowner with a large backyard successfully extended their WiFi coverage effectively and affordably using outdoor Wireless Access Points (WAPs). 0:00 Introduction Advantages of Outdoor WAPs Implementation Process Showcase How to Use ...
Maximizing WiFi 6 AP Performance with 10G Fiber Media Converter Kit
Переглядів 34919 годин тому
In this video, we delve into the exciting world of high-speed networking, focusing on how to maximize the performance of your WiFi 6 Access Points (APs) using a 10G Fiber Media Converter Kit. Whether you're setting up a high-density network in a convention center, airport, or large shopping mall, this comprehensive guide will walk you through the process of upgrading your network infrastructure...
Understanding 5V/12V Voltage Regulators: A Beginner's Guide
Переглядів 222День тому
Welcome to our beginner's guide to 5V/12V voltage regulators! In this video, we’ll dive deep into the world of voltage regulators and focus on the 5V/12V Voltage Regulator. We'll explore the importance of voltage regulation in electronic circuits, discuss key features and benefits, and showcase practical applications. This guide will help you understand how to effectively use voltage regulators...
Understanding 48V Voltage Boosters: A Beginner's Tutorial
Переглядів 454День тому
Are you struggling with fluctuating power affecting your devices' performance? Discover how a 48V Voltage Booster can provide the stable power you need! In this beginner's tutorial, we'll explore the 48V Voltage Booster, its functionality, and how it can benefit various applications like telecommunications, renewable energy systems, and electric vehicles. 0:00 Introduction What is a 48V Voltage...
Industrial Networking Simplified: Isolated RS-232/RS-485 Hub Explained
Переглядів 206День тому
Welcome to our latest video on industrial networking! In this episode, we dive into the world of the Isolated RS-232/RS-485 Hub and explore the benefits and features of this crucial device. We’ll guide you through the step-by-step process of data transfer and isolation, showing you how this hub can improve your network's reliability. Understanding this device is crucial for ensuring robust and ...
Introduction to Industrial RS-232/422/485 to Fiber Converters
Переглядів 14014 днів тому
In this video, we explore the essential role of industrial RS-232/422/485 to fiber converters in enhancing data transmission reliability in industrial settings. Discover how these converters extend communication distances, improve signal integrity, and integrate fiber optics with traditional serial communication protocols. 0:00 Introduction Challenges with Serial Communication Introduction to F...
Introduction to RS232/422/485 Serial-to-Ethernet Device Servers
Переглядів 43214 днів тому
In this video, we delve into the fascinating world of RS232/422/485 Serial-to-Ethernet device servers. These devices are crucial in modern networking, especially for integrating legacy serial devices with today's advanced Ethernet networks. We will cover their working principles, explain the virtualization of signals, and demonstrate how they can move old computer COM ports to sensor front ends...
Integrating Modbus RTU over Video Devices with Your Security System
Переглядів 19514 днів тому
In this comprehensive guide, we delve into the world of Modbus RTU over video devices and how you can seamlessly integrate serial sensors with your security camera system. Whether you're a DIY enthusiast or a professional installer, this video provides a step-by-step process to enhance your security setup, making it smarter and more efficient. 0:00:00 Introduction to Modbus RTU over Video Devic...
Expanding Your Network: How to Use Wireless Network Bridges | Point-to-Point
Переглядів 50714 днів тому
Are you looking to extend your network coverage without the hassle of laying cables? Wireless network bridges might be the solution you need! In this comprehensive guide, we delve into the world of wireless network bridges, focusing on point-to-point connections. Expanding network coverage has never been easier with the versatility of wireless bridges. 0:00 Introduction Understanding Wireless N...
Understanding HD Network Camera Modbus RTU over Video Devices
Переглядів 15314 днів тому
In this video, we delve into the fascinating world of Modbus RTU over Video Devices. Learn how these devices enhance surveillance systems by overlaying critical information such as timestamps, camera IDs, and custom text onto video feeds. 0:00:00 Introduction to Modbus RTU over Video Devices What are Modbus RTU over Video Devices? How Modbus RTU over Video Devices Work? Types of Types of Modbus...
Upgrading to a 2.5G PoE Network for Outdoor WiFi 6 APs
Переглядів 46421 день тому
Are you ready to take your outdoor WiFi experience to the next level? Join us in this video as we explore the benefits of upgrading to a 2.5G PoE network for your outdoor WiFi 6 access points (WAPs). Stay ahead of the curve with the latest in networking technology and unlock the full potential of your outdoor WiFi experience. 0:00 Introduction Why Upgrade to 2.5G Network Required Equipment: Out...
Extending Your Network Using a Wireless Bridge
Переглядів 33521 день тому
Extending Your Network Using a Wireless Bridge
Extending WiFi to a Workshop 300 Meters Away Using Cat5e/Cat6 Cables | Case Study
Переглядів 47628 днів тому
Extending WiFi to a Workshop 300 Meters Away Using Cat5e/Cat6 Cables | Case Study
The Ultimate WiFi Coverage Solution for Small-to-Medium Business
Переглядів 47528 днів тому
The Ultimate WiFi Coverage Solution for Small-to-Medium Business
Wi-Fi is too Weak? Set Up Access Points for Better Coverage
Переглядів 446Місяць тому
Wi-Fi is too Weak? Set Up Access Points for Better Coverage
Traditional APs vs. Mesh Networks and Wireless Bridges: Which Is Better for You?
Переглядів 481Місяць тому
Traditional APs vs. Mesh Networks and Wireless Bridges: Which Is Better for You?
Wireless Access Points vs. Routers: What's the Difference?
Переглядів 556Місяць тому
Wireless Access Points vs. Routers: What's the Difference?
How to Choose the Right Security Camera for Parking Lots
Переглядів 419Місяць тому
How to Choose the Right Security Camera for Parking Lots
Wireless Access Points Explained: Boosting Your WiFi Coverage
Переглядів 492Місяць тому
Wireless Access Points Explained: Boosting Your WiFi Coverage
Top Devices to Improve Your WiFi Coverage in 2024
Переглядів 451Місяць тому
Top Devices to Improve Your WiFi Coverage in 2024
Connecting Access Points Using Fiber Optic Cables: A How-To Guide
Переглядів 1,1 тис.Місяць тому
Connecting Access Points Using Fiber Optic Cables: A How-To Guide
Ultimate Guide to Setting Up Your 4K Security Camera System
Переглядів 630Місяць тому
Ultimate Guide to Setting Up Your 4K Security Camera System
How to Set up an IP Camera System from Scratch
Переглядів 797Місяць тому
How to Set up an IP Camera System from Scratch
Wireless Security Cameras: Are They Worth Trying?
Переглядів 622Місяць тому
Wireless Security Cameras: Are They Worth Trying?
Top Tips: A Thoughtful Guide to Choosing Your Surveillance Cameras
Переглядів 413Місяць тому
Top Tips: A Thoughtful Guide to Choosing Your Surveillance Cameras
Ultimate Guide: Choosing Security Cameras for Your Retail Business
Переглядів 254Місяць тому
Ultimate Guide: Choosing Security Cameras for Your Retail Business
Great video. can you place the booster after the solar panel to then a charge controller. i need to charge a 48v bank, with a 12v solar panels.
how can i order your poe extender?
I'm planning to open a company, where I can provide equipment and services with solutions in Pakistan. I may contact your company/manufacturing facility for the equipments etc
Hi, please contact us at support@fastcabling.com to discuss this further.
How to connect a number of long distance 60 cctv ip camera each camera separate from the other camera 1000 feet using fiber cable all camera connected to control room. If cable cut, can camera used wirless.
Hi, if you're interested, we can provide free solution design for our customers. Could you send a layout to support@fasctabling.com? Please mark where the cameras will be installed and indicate the distance between them as well.
Can connect ip camera using fiber optic cable for long distance to a network control room and using the same ip camera wireless connected to the control room if fiber optic cut
Yes, you can use dual IP setup if supported by the cameras, or configure the camera to automatically switch to the secondary network upon failure of the primary.
thanks for sharing
My pleasure! If you're interested, please subscribe to our channel. More tutorials are coming soon!
How much range can it cover in meters or feet ? Also I am looking for flood light where the camera can rotate for 0 to 180 degrees covering atleast 100 feet distance and the lights should get adjusted accordingly , i mean lights can also be adjusted. Please help on this.
The maximum range is 100 meters or 328 feet. However, if you need to install the cameras at further distances, you can use a long-range PoE+ switch. Supported by 4-pair technology, the long-range PoE+ ports can supply 30 watts of power even at a distance of 500 meters (when connected to a PoE extender). Product Link👉 www.fastcabling.com/product-category/long-range-poe-switches/ We don't have flood light cameras, but here are some of our recommendations: 1. Reolink Lumus PTZ Security Camera with Floodlight: 355° pan, 140° tilt, 4X optical zoom, 1800 lumens adjustable floodlight. 2. EZVIZ LC1C Smart Security Light Camera: 270° field of view, 2000 lumens adjustable floodlight, customizable motion zones.
I thought it would have been easier if a wireless p2p was established from the Internet side to the factory. This is because there might not be room to run the 300M cable on the ground to power and data the WiFi 6
It's possible but you need a clear line of sight between two locations, otherwise, the signal integrity will be compromised. If you have enough space to run the cable, it can provide consistent and stable data transfer. Moreover, wired connections are immune to electromagnetic interference that can affect wireless signals.
Hi, how can I fix the problem: this SIM card is not supported, please use the sim delivered with the device. I want to use other sim of other companies. How can I do that? Please.
My camera is a 4g lte, please can you help me?😢
You can contact the manufacturer for an unlock code if there is any. Sometimes, the camera can only accept certain types of SIM cards, which are vendor-specific.
Hi, how can I fix the problem: this SIM card is not supported, please use the sim delivered with the device. I want to use other sim of other companies. How can I do that? Please.
Ensure that the new SIM card is compatible with the camera (e.g., correct size, network type). Some devices only support certain types of SIM cards (e.g., 4G LTE, 3G). Some devices can be unlocked by entering a code. You can contact the original carrier or the camera manufacturer to request an unlock code. If the manufacturer does not provide an unlock code, you might consider using a reputable third-party unlocking service.
Hi, how do they connect street cameras to internet? Are Street cameras connected to any NVR?
Wired cameras are connected via Ethernet cables to network switches, which are then connected to an NVR. The NVR records and manages the video feeds from all connected cameras. On the other hand, wireless cameras can connect to a wireless network, and the NVR, also on the same network, can receive and record video streams.
Good video guys ! Another tip to help, put a Name beside or above the link for the product AKA Access point Link : thenlinktoproduct
Could you guys help in installing this kind of extension for my new home. I have 5 poe points
Hi, we can provide free network design for our customers. To get started, could you please send a layout of your new home to support@fastcabling.com? Please mark where the devices will be installed and indicate the distances between them.
Hi teacher, i follow you from Mali, i have a question. If Nvr password different for camera, it works?
Yes, it will work. The NVR and the IP cameras can have different passwords. They are separate devices, and each has its own login credentials for security purposes. When adding cameras to the NVR, you will need to input the correct IP address, username, and password of each camera in the NVR setup interface. This allows the NVR to access and record the video feeds from the cameras despite having different passwords.
Thank you
My pleasure!
Come si può utilizzare un solo mouse per tutti i DVR?
Lo switch NVR consente di controllare più sorgenti HDMI contemporaneamente.
Can we connect 2 poe switches distance between them is 500 meters
You can use this kit: www.fastcabling.com/product/500-meters-long-range-poe-extension-kit/
nice job mahn thanks
My pleasure!
How do assign static IP and how to do that online?
First, you need to find the camera's current IP address. You can check your router’s connected devices list to find the IP address assigned to your camera. Then, open a web browser, enter the IP address of the camera, and log in with the camera’s admin credentials. Once logged in, go to the camera’s network settings section. Locate the option for IP address configuration. Select the option for a static IP address and enter the desired static IP address, subnet mask, default gateway, and DNS servers. Make sure the IP address is within the same range as your network and does not conflict with other devices. Example: IP Address: 192.168.1.100 (Make sure this is unique within your network) Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.1 (typically your router’s IP address) DNS Server: 8.8.8.8 (Google’s DNS server) or your preferred DNS server Lastly, save and apply the settings.
@@Fastcabling I assigned static IP within NVR NIC 1 that IP is allowed to the internet but it does not work for example 192.168.199.2 255.255.255.0 192.168.199.1 8.8.8.8
Please check: 1. The IP address is not in conflict with any other device on the network. 2. The default gateway is reachable from the camera’s subnet. 3. The DNS server is reachable to resolve domain names correctly.
Thanks for sharing! Could you please tell me how much more expensive hybrid cable is compared to standard fiber cable?
You can find more information here👉www.fastcabling.com/product-category/composite-fiber-cable/
Thanks for the response. Your channel is great and it helped explain why my wireless nodes in my mesh system don’t have the same speed as my router and network
Glad to know it helps! Stay tuned!
There is a problem here which is how to go to the settings of each NVR on the main screen without displaying it on the second screen, as the second screen should be for the displayed cameras only. How to fix that?
In the display settings, you should see options for configuring the output for both monitors. Set the primary monitor (main screen) to display the administrative interface, and then set the secondary monitor to display the camera feeds only. Assign the main monitor as the "Control" or "Admin" screen, and the second monitor as the "Live View" or "Monitoring" screen.
Thank you for the informative video ! Do SFP modules support both UPC and APC fiber ? I'm asking because no SFP specification, that I came across, mentions this. Thanks
The SFP modules support simplex LC. You can find the specifications in the 'Resources' section of the product page. www.fastcabling.com/wp-content/uploads/2022/08/ds-5976-84-BiDi-SFP-Fiber-Modules.pdf
Thanks for the prompt response ! What I was referring to, was the LC connector polishing. LCs have different polishes of the connector - UPC(Ultra Physical Contact) and APC(Angled Physical Contact). Since it's not mentioned in the specifications, does that mean that this is irrelevant for SFPs. Thanks
It's UPC.
Although what you're showing is technically acceptable, as an engineer for a large switch manufacturer, I would not settle on media converters. Only in the rare case of retro-fitting and existing network with older Ethernet-only hardware... But, chances are, if you're upgrading to 10G speeds, you'll need to replace the hardware at each end for higher throughput and PPS... Instead I would use switches that support SFP (1G) or SFP+ (10G) directly. I would use SFP+ Transceivers in my switches, and Multimode fiber cables, as a less expensive solution, since distance up to 500m are possible.. If you need longer than 500m, then consider Single-mode transceivers and fiber cables..
Can I connect as a repeater without wire
Yes, you can create a mesh network or use the WDS feature. First, navigate to the “Operation Mode” settings of the secondary EAP225 and select the “Repeater” or “Range Extender” mode. In the “Wireless” settings, set the SSID and security settings to match those of the main EAP225. This ensures seamless roaming between the two devices. Select the same channel or set it to auto to allow the EAP225 to choose the best channel.
love this channel
Thank you very much!
Hi team, do you have a video showing how to connect WiFi cameras to a dahua Nvr? In particular EZVIZ WiFi cameras? Thanks in advance
Hi, we don't create videos about other brands. Our channel mainly focuses on Fastcabling products, tech design and case studies. For integrating EZVIZ WiFi cameras with a Dahua NVR, we recommend referring to the user manuals or contacting their customer support teams for assistance.
How many meters can I run the sub router with this Cat 6 cable?Can I run up to 300 meters?
Please let me know ❤
The maximum distance is 100 meters/328 feet if you don't add use any extenders. By using the long-range PoE+ switch, you can effectively extend the range to 500 meters at speeds up to 100Mbps. www.fastcabling.com/product-category/long-range-poe-switches/
what if LAN were whites only?
LAN cables come in various colors, and these colors do not affect their functionality. Different colors can help network administrators identify and manage cables easily. Common colors include blue, yellow, green, red, and white. For instance, blue cables might be used for data, while yellow might be used for PoE. There is no strict industry standard that dictates specific colors for specific purposes.
How did the POE switch recognize each port from the camera to the NVR, kindly explain
The PoE switch operates based on standard networking protocols that allow connected devices to communicate with each other. Each IP camera obtains an IP address either via DHCP or static assignment. The camera sends video data packets through the Ethernet cable to the PoE switch. Then, the PoE switch forwards the data packets to the NVR based on the NVR’s IP address. The NVR is configured to recognize and manage the cameras by their IP addresses. When it receives the video streams from the cameras, it records the data and allows for live monitoring.
What type of POE switch have you used on this setup? Managed or unmanaged?
It's an unmanaged PoE switch. It has a plug-and-play setup with no configuration required, ideal for smaller networks. www.fastcabling.com/product-category/unmanaged-switches/ But if you want to create VLANs or prioritize traffic for certain PoE ports, you can use a managed PoE switch instead. It has advanced features such as VLANs, QoS, link aggregation, SNMP and access control lists (ACLs). www.fastcabling.com/product-category/l2-managed-switches/
Thank you for everything you do. I want you to do a video on solar powered smart city cameras Thank you again.
You can refer to this video 👉ua-cam.com/video/1g4l-u3JBDo/v-deo.html
Thank you for an informative video.
Glad to know you find this video useful! Stay tuned!
How about spy camera?
Most spy cameras are wireless, which are easier to install. First, you need to plug the camera into the outlet. Then, connect the camera to your Wi-Fi network using the provided app. Lastly, configure the settings in the app and test the camera’s view.
Most Cameras come with its own NVR, with built-in PoE. It's the software, settings that I need for the camera. It's not easy to find stand-alone NVR to match with Cameras and PoE Switch, not compatible for software settings.
Generally, the manufacturer will provide compatible software for your cameras if they're vendor-specific. You can also use third-party software such as Blue Iris, VLC Media Player, and iSpy if your camera is onvif-compatible.
@@Fastcabling Can you do video clip on mix and match poe cameras and stand-alone NVR of different brands, particularly generic ones? also video on software settings on the nvr and network router, particularly SAN, so different users on the network can view and save their own copy of the video saved on SAN?
I'm afraid SAN is not our area of expertise, but thank you for your suggestions. We will definitely consider it.
Can you please show me how to connect DH-XVR5104HS-4KL-13to dual monitor Thanks a lot from ADEN-YEMEM
The DH-XVR5104HS-4KL-13 typically has multiple video outputs, such as HDMI and VGA, which can be used to connect to different monitors. In the display settings menu, configure the output for each monitor. You may need to set the primary and secondary display or enable dual monitor mode. Ensure that both HDMI and VGA outputs are enabled.
What is the name of the device where you have connected the main monitor please?
It's the NVR switch. www.fastcabling.com/product-category/monitoring-center/
What apps is that camera?
It's Green Backyard app. play.google.com/store/apps/details?id=com.nvictech.greenbackyard&hl=en_US
Can i install a 3 wireless bridges togther to get connection at 3 different buildings?
We have newly launched a 5km outdoor wireless bridge that can configured for point-to-multipoint setups within a 30-degree beamwidth. If you have any questions, please feel free to contact us at support@fastcabling.com! Product Link: www.fastcabling.com/product/5km-outdoor-wireless-bridges/
Thank you but I want to add a wireless access point to my poe nvr so I can add wireless cameras to my nvr. Can you please tell me how to do that?
Hi, here's a general guideline for your reference: 1. Connect the Ethernet cable from one of the PoE ports on your NVR to the Ethernet port on the WAP. If the WAP supports PoE, it will get both power and data through the Ethernet cable. If not, you will need to power the WAP separately using its power adapter. 2. Configure the SSID (network name) and password for the WAP. Choose the appropriate WiFi channels and security settings. 3. Install and power up the wireless cameras. Use the camera’s configuration interface (often accessible through a mobile app or web browser) to connect the cameras to the SSID you set up on the WAP. 4. Navigate to the camera management section in the NVR’s interface. Select the option to add cameras manually or automatically search for devices on the network. Enter the IP addresses of the WiFi cameras, and provide any required login credentials for the cameras.
Thank you VERY much. I’d rather not cause more conflict in WiFi since I’m already using two WiFi routers on different SSID’s in my house. The NVR i have already has 4 POE cameras connected and working great for many years. That NVR is connected to one of my wireless routers. That way I can view my 4 POE home security cameras worldwide. I connected the WiFi camera to that same router wirelessly but unfortunately my NVR will not recognize it. It is an ONVIF and IP camera. What can I do? Thank you
Well, here is something you can try. First, you need to find the IP address of the WiFi camera. Then, access and configure the WiFi camera’s settings for ONVIF. Add the WiFi camera to the NVR using the IP address and credentials. Once the camera is added, check the live view on your NVR to ensure the camera feed is visible. If it doesn't work, please verify there are no IP conflicts and the WiFi signal strength is sufficient for the camera. If the NVR does not recognize the camera, verify that both devices are fully ONVIF-compliant and support the same ONVIF profile (usually Profile S for streaming).
@@Fastcabling I did try all that previously, however your last point about confirming ONVIF profile S. I’m unable to locate that particular setting in my NVR Camera settings. Thank You very much for your expert guidance!
Do you have training program?
No, but we're currently building a community and an online course. Please stay tuned!
what if its 2 or more cameras do i need to use multiple cables and we only 2 ports on the nvr
You can connect the fiber cable to an outdoor poe switch to install multiple cameras. Watch the video here👉ua-cam.com/video/jDeD8ROxQRg/v-deo.html
Your website doesn't load 😢
We have checked the site thoroughly and can't find any issues. Could you please try again? If you have any questions, please contact us at support@fastcabling.com.
Uplink Port to Regular Port, or Uplink to Uplink Port, which the best?
If high bandwidth is needed between the two switches (e.g., for high data transfer rates or many connected devices), uplink to uplink is often preferred. In this case, we connected uplink to uplink using fiber connections to maximize throughput (10Gbps).
Then can you do the cctv that don't have lan port? I have a Ethernet and usb micro for my router but it need power to work
How much cover Distances range outdoors...?
cover a radius of 100 meters
Is this 2.4 or 5gig or 60gig Radio ?
It runs on 5GHz.
My name it’s Ben l am in South Africa. I just want know what brand wireless connectors as we use Ubiquity or Wis network?
It's our new product 👉www.fastcabling.com/product/5km-outdoor-wireless-bridges/
Confused, why use the rj45 converter to fiber at the router, vs just using an sfp+ to rj45 10G or 1G transceiver module at the switch side? I guess maybe depends on how easy it is to run the fiber vs cat6, shouldnt be a speed difference?
That's because the router doesn't have a fiber/SFP slot. The media converter is used to convert electrical siganls to optical signals, and vice versa.
@@FastcablingI assumed the RJ45 converter transceivers were bi directional so you could run cat 5 or cat 6 to the router
Yes, they can convert Ethernet signals from copper (RJ45) to fiber and from fiber back to copper (RJ45). You can run a Cat5/6 cable to the router and connect the media converters using the fiber optic cable.
Another good one guys !!